Project 56 (nuclear test) facts for kids
Quick facts for kids Project 56 (nuclear test) |
|
|---|---|
| Information | |
| Country | United States |
| Test site | NTS, Areas 1–4, 6–10, Yucca Flat |
| Period | 1955–1956 |
| Number of tests | 4 |
| Test type | dry surface |
| Max. yield | 10 tonnes of TNT (42 GJ) |
| Navigation | |
| Previous test series | Operation Wigwam |
| Next test series | Operation Redwing |
Operation Project 56 was a series of 4 nuclear tests conducted by the United States in 1955–1956 at the Nevada Test Site. These tests followed the Operation Wigwam series and preceded the Operation Redwing series.
Introduction
These experiments were safety tests, the purpose of which were to determine whether a weapon or warhead damaged in an accident would detonate with a nuclear yield, even if some or all of the high explosive components burned or detonated. The procedure for these tests was to fault the test bomb by removing a detonator wire, or perhaps all but one, for example, possibly enhancing the weapon with extra initiators or an especially enriched core, and then to fire the weapon normally (see Warhead design safety). If there is any nuclear yield in the firing, then the test is deemed a failure from a safety standpoint. A successful test will measure only the chemical explosive in the test bomb exploding, which still, of course, blasts the bomb core and causes the core material to be spread over a wide area if the test is in open air, as all the Project 56 tests were.
Aftermath
Over 895 acres (362 ha) of Area 11 at the NTS were contaminated with plutonium dust and fragments. The area has become known as Plutonium Valley, and continues to be used on an intermittent basis for realistic drills in radiological monitoring and sampling operations.
| Name | Date time (UT) | Local time zone | Location | Elevation + height | Delivery Purpose |
Device | Yield | Fallout | References | Notes |
|---|---|---|---|---|---|---|---|---|---|---|
| 1 | November 1, 1955 22:10:?? | PST (–8 hrs) |
NTS Area 11a 36°59′04″N 115°57′41″W / 36.98444°N 115.96151°W | 1,271 m (4,170 ft) + 0 | dry surface, safety experiment |
TX-15/39 primary ? | no yield | One point safety test of sealed pit, successful. Extra oralloy in the core and three zippers were used to make sure of a worst case condition in the pit for supporting fission, which would have been deemed a test failure. | ||
| 2 | November 3, 1955 21:15:?? | PST (–8 hrs) |
NTS Area 11b 36°58′48″N 115°57′34″W / 36.9801°N 115.9594°W | 1,263 m (4,144 ft) + 0 | dry surface, safety experiment |
W-25 | no yield | One point safety test of W-25 sealed pit, successful. 3 zippers used to make sure of plentiful neutrons. | ||
| 3 | November 5, 1955 19:55:?? | PST (–8 hrs) |
NTS Area 11c 36°58′33″N 115°57′26″W / 36.97572°N 115.95732°W | 1,260 m (4,130 ft) + 0 | dry surface, safety experiment |
TX/W-28 primary | no yield | One point safety test of TX/W-28 primary, successful. 3 zippers used to make sure of plentiful neutrons. | ||
| 4 | January 18, 1956 21:30:?? | PST (–8 hrs) |
NTS Area 11d 36°58′17″N 115°57′19″W / 36.97135°N 115.95539°W | 1,252 m (4,108 ft) + 0 | dry surface, safety experiment |
TX/W-28 primary | 10 t | One point safety test partial failure, due to large neutron initiation (6 zippers) in what would otherwise have been a just-barely-critical device. |
See also
In Spanish: Proyecto 56 para niños
